19” rack mount solid state liquid chiller with integral tc-3300 temperature control (10 pages)
Summary of Contents for teca TLC-700
Page 1
If you have any questions with your equipment, please do not hesitate to call us toll free at (888) TECA-USA (832-2872), we will be happy to assist. We are open from 8:00 am to 4:30 pm Central Time.
PID control method and then performing an autotune for better temperature control. We hope you enjoy your new Ameritemp™ series liquid chiller. If you have any questions, please do not hesitate to call our technical department @ 888-TECA-USA (888-832-2872). Position this tubing upwards while filling the lines...
Page 6
TC-3300 SET UP (ON/OFF STYLE) To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
Page 7
TC-3300 SET UP (PID STYLE) FOR COOL ONLY. To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
Page 8
In order to use tune option with the controller for cool only set up, the controller should be set up with PID STYLE COOL ONLY settings. Follow the steps outlined below to change the controller settings from ON/OFF STYLE to PID STYLE COOL ONLY . Method 1: rsEt - In LEVEL 3 change the rsEt value to All.
700, 702 YEAR OF MANUFACTURE Refer to the first two digits of the serial number on the manufacturers ID label MANUFACTURER TECA Corporation 4048 W. Schubert Ave. Chicago, IL, 60639 U.S.A. APPLIED STANDARDS Application of Council directive: Machinery Directive (89/336/EEC)
TECA’s products within one year after the date they are delivered to Buyer, and if : (a) TECA is notified of the defect in writing by certified mail within 14 days of the date of discovery; (b) TECA may then either, at its sole discretion, inspect the product at Buyer’s location, or require that the product be made...