Programming The Entry Panel Surveillance Camera - Gewiss Chorus Antas GW19061 Programming Manual

c
Assign Calls
To Transfer
the Calls assignment
to this Entry Panel
press
ESC
Lingua
Assign Calls
Set the receiver
in programming
mode
ESC
Lingua

Programming the entry panel surveillance camera

d
0
100 °
6
82 °
1÷9
4
72 °
54 °
8
e
f
Close the communication (by hanging up the receiver, if applicable
c) and continue, repeating the same procedure for all the other
extensions.
y
If the window and LED configuration shown to the side ap-
pear on the display, the programming cannot be performed
from this entry panel: in order to make the operation possible,
press
Program. impianto
You will return to the configuration shown to the side and can then
Attendere
proceed with the assignment of the calls as illustrated on the previ-
ous page.
ESC
Program. impianto
Attendere
ABC DEF
GHI JKL MNO
During the system programming, with the monitor switched off,
ESC
press the "Self-connection
PQRS TUV
WXYZ
field" of the camera.
Starting from the default configuration, you can scroll through the
next configurations (figure e) by pressing the AUX1 key or return
to the previous configurations with the AUX2 key f: the setting
DEF
ABC
is automatically saved.
GHI MNO
JKL
PQRS TUV WXYZ
2
7
5
1
9
3
Programming Manual-System Programming
.
" key (figure d) to adjust the "visual
IT
EN
DE
FR
ES
PT
47