Assigning Address To Indoor Unit - Samsung AVMCH070EA4 Installation Manual

Assigning Address to Indoor Unit

16
E-
1 Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
2 The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02)
and RMC(SW03) rotary switches.
K1 K2 K3 K4
SW04
K5 K6 K7 K8
SW05
K9 K10
SW06 SW01 SW02
Setting Main Address
The MAIN address is for communication between the indoor unit and the
outdoor unit. Therefore, you must set it to operate the air conditioner
properly.
You can set the MAIN address from '00' to '39' by mixing SW01 and
SW02. The MAIN address from '00' to '39' should differ from each other.
Check the indoor unit address on the plan that you are to install and set
the address according to the plan.
Indoor unit
SW01 SW02
0, 1, 2~9
0, 1, 2~9
Setting RMC Address
The SW03 RMC switch is the address setting switch for controlling the
indoor unit with the wired remote controller and centralized controller.
You must set the SW03, K1 and K2 switch when using the wired remote
controller and centralized controller.
You don't have to set the SW03 RMC switch when not using the wired
remote controller and centralized controller.
RMC SW03
SW01
address
00 ~ 09 0, 1, 2~9
10 ~ 19 0, 1, 2~9
Indoor unit
SW02
address
20 ~ 29
30 ~ 39