Rack Dry (Dv42H5400* Only) - Samsung DV42H5000GW User Manual

Rack dry (DV42H5400* Only)

Installing the drying rack
1. Open the dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the
drying rack (A) on the top of the lint filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall,
and then push down the middle of the drying rack to fix in place.
4. Place the items to be dried on the rack, leaving space between them
so air can circulate.
5. Close the dryer door.
6. Press the Rack Dry button in the TIME DRY cycle and then select the
time according to the amount of moisture and the weight of the items.
The drying rack can be also used at AIR FLUFF cycle.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items and lead to a fire
hazard.
The drying rack is not included in the DV42H5200* and DV42H5000* models.
You can purchase the drying rack (part code: DC61-02705A) at a local Samsung service center.
DV5000H_DC68-03381A-14_EN.indd 31
A
SUGGESTED TEMP. SETTINGS
Extra Low (TIME DRY cycle)
Extra Low (TIME DRY cycle)
AIR FLUFF
AIR FLUFF
AIR FLUFF
English - 31
2019-03-26 6:31:53