Samsung DV42H5000GW User Manual page 27

Gas and electric dryer
Hide thumbs Also See for DV42H5000GW:
Table of Contents

Advertisement

Available languages

Available languages

CYCLE
REFRESH
WRINKLE AWAY
2. Cycle options
Anti Static
(Steam Model
Only)
Rack Dry
Mixed Load Bell
Wrinkle Prevent
My Cycle
Adjust Time
Small Load Care™
DV5000H_DC68-03381A-14_EN.indd 27
RECOMMENDED ITEMS
Shirts, Trouser, Comforter,
Pillows (Confirm that the
laundry load is dry)
Shirts, Trouser, Blouses
(Confirm that the laundry
load is dry)
To reduce statics by clothing friction and spray steam at the later period of drying
cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS, DELICATES (Dry level of
every course exceeds Normal) and TIME DRY course.
In order to reduce statics, the drum can be paused during operation.
Rack Dry is available in the TIME DRY cycle. Temperature will be set to Extra Low only.
(Refer to the "Rack dry (DV42H5400* Only)" section on page 31.)
The mixed load bell that notifies you when the average dry level in a load is damp
dry (80 % dried). This lets you take garments that you don't want fully dried or that
dry quickly out of the dryer early while letting others continue to dry.
You can select this function in all Sensor Dry cycles except WOOL, SANITIZE. The dry
level selections are limited to Normal Dry, More Dry, and Very Dry.
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in
unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent
button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Choose your favorite cycle including cycle, temp, dry level option, etc. (Refer to the
"My Cycle" section on page 33.)
Time can be added or subtracted from the automatically set times in the Manual Dry
cycles (TIME DRY, QUICK DRY, or AIR FLUFF cycles) and WRINKLE AWAY cycle.
To add or subtract time from the cycle, press the Adjust Time arrow pad up or down
until the desired time is displayed.
To control operation rate for drying a small loads at Sensor Dry course.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS and DELICATES course.
It can't be selected/cancelled when the drying course is running.
In order to improve drying effect and control operation rate, the drum can be paused
during operation.
English - 27
DETAILS
This cycle is best for smoothing out wrinkles and
reducing odors from loads consisting of one to four dry
items. In this cycle a small amount of water is sprayed
into the dryer drum after several minutes of tumbling
with heat.
The WRINKLE AWAY cycle removes wrinkles from
clothes stored in closets, etc. It provides wrinkle release
via optimized steam care.
For best results, load 2-3 items at once.
You can extend the drying time by a minimum of
20 minutes, depending on the item type or load.
2019-03-26
6:31:52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents