Front Panel Controls - Octave V110 Manual


Power switch

Input selector

LED indicators

BIAS adjustment BIAS regulators and corresponding LED array for each power tube
4. CONTROLS – the front panel
0 = off; 1 = on. Power LED and Soft-Start LED illuminate. The Soft-
Start LED extinguishes after the start-up period of 50 seconds.
This is used to select the desired input signal. A blue LED indicates
the selected input on the display.
Pos 1: CD 1 RCA line level input for CD, SACD and similar
Pos 2: Tuner RCA line level input for tuner, etc.
Pos 3: Aux 1 RCA line level input for video, etc.
Pos 4: Aux 2 RCA line level input for video, etc.
Pos 5: CD 2 XLR line level input for CD, SACD or similar.
Pos 6: The electronic BIAS measurement system is
activated (see chap. 7.3).
Pos 7: Front Ch. Multichannel input. In this mode, the V 110
functions as a two-channel power amplifier. The
volume control is bypassed. (See chap. 6.4)
The record output is switched off in this position.
Indicating the active input
14