ENGLISH
12
11
Insert the plug at the other end of the power cord into a wall socket
with suitable power voltage.
12
Make sure that the control dial is on " " position.
13
Press the "
" ON/OFF button to turn the machine on; the "
will begin to fl ash quickly, indicating that the circuit has to be primed.
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the fi rst time, the following activities need to
happen:
1) You need to prime the circuit.
2) The machine will perform an automatic rinse/self-cleaning cycle.
3) You need to perform a manual rinse cycle.
Circuit Priming
During this process, fresh water fl ows through the internal circuit of the
machine and the machine warms up. This takes a few seconds.
1
Place a container (1L) under the steam/hot water wand or Classic Milk
Frother (if supplied).
" light