Preparing The Machine; Programme Selection - Beko DDS25840X User Manual

Hide thumbs Also See for DDS25840X:
Table of Contents

Advertisement

process complete. Draining is completed in
2 minutes and the machine gives an audible
warning when it is completed.
Function keys
If you press any of the Function keys
during programme selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected programme.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
6.2 PREPARING THE
MACHINE
1.
Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
6.3 PROGRAMME
SELECTION
1.
Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid indicators
and add salt and/or rinse aid if needed.
3. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
4. Selected programme will start when
you close the door of your machine.
16
USA

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dis25840

Table of Contents