Filling The Dishwasher Salt Dispenser - Beko DDS25840X User Manual

If the hardness level of the water that you
use is above 90°dF (French standard for
water hardness) or if you are using well
water, than it is recommended to use filter
and water purification devices.
* If the hardness level of the water
that you use is below 8°dF (French
standard for water hardness), there is
no need to use salt in your dishwasher.
If this is the case, Salt Indicator (if any)
illuminates continuously on the panel
of your machine.
If the water hardness is set to level 1, the
Salt Indicator will illuminate continuously
although it is not necessary to use salt. If
you use salt under this condition, salt will
not be consumed and the lamp will not
illuminate.
C
If you move your house, it
is very important to make
the water hardness level
adjustment of your machine
according to the new location
you move in order to preserve
the washing efficiency.
If the water hardness level
of your machine is adjusted
previously, your machine
will display the most recent
hardness level adjustment.
Adjust the new water hardness
level of the machine based on
the water hardness level of the
tap water.
9. FILLING THE
DISHWASHER SALT
DISPENSER
(MODEL DEPENDING)
A
CAUTION :Never use culinary
or table salt. These types of salt
do not dissolve in water easily
and will damage the function of
the softening device.
C
NOTICE: Only use special
dishwasher salt in your machine
to soften the water.
Do not use coarse grained salt.
Small grains or powdered salt is
more easily soluble.
The manufacturer is not liable
for damages resulting from the
use of the wrong type of salt.
1. Remove the lower rack from the
machine.
A
B
27
USA