Table of Contents
Advertisement
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid
•
when adding rinse aid.
Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
•
supply water appropriately and check the water hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures
(e.g. 60-65°C). You can also use glass protective detergents that are commercially
available.
Foam forms in the machine.
Dishes are washed with hand-wash detergent by hand but not rinsed before placing
•
them into the machine. >>> Hand-wash detergents do not contain antifoam. There
is no need to hand-wash the dishes before placing them into the machine. Removing
the coarse soil on the dishes under tap water, with a tissue paper or fork will be
sufficient.
Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
•
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with
the help of a tissue paper/towel.
Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
•
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
•
user manual.
Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
•
Water remains in the dishwasher at the end of the programme.
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
•
regularly as illustrated in section "Cleaning and Care".
Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary,
•
remove the discharge hose, clear the blockage and insert is as illustrated in the user
manual.
37
USA
Advertisement
Table of Contents
