System Menu - Samsung T20A350 User Manual

Basic Features
■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎
The available Digital Audio output (SPDIF) format
may differ depending on the input source.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Speaker Settings
■ Speaker Select (External Speaker / TV Speaker): A
sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External
Speaker, the volume and
operate and the sound settings will be limited.
✎
When Speaker Select is set to External
Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be
mute.
■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
MUTE buttons will not
¦ Selecting the Sound Mode
When you set to Dual fg, the current
sound mode is displayed on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM Stereo
Stereo
Dual
✎
If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
✎
Only activated in stereo sound signal.
✎
Only available when the input Source is set to TV.

System Menu

¦ Setting the Time
O
MENUm → System → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
x
Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
x
Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
DUALf-g
Default
Dual f-g
Mono
Automatic
change
Stereo ↔ Mono
Dual f ↔ Dual g Dual f
Mono
Automatic
change
Mono ↔ Stereo
Mono ↔ Dual f
Dual f
 Dual g 
English
30