Setting the On / Off Timer
On Timer
■
On Timer 1 / On Timer 2 / On Timer 3: Three different on
timer settings can be made. You must set the clock first.
On Timer 1
Setup
Off
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Time
0:00
Volume
20
Source
TV
Aerial
DTV
Channel
1
Close
Return
R
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at your convenience. If you
select Manual, you can set up the day you want to activate
the timer.
✎
The
mark indicates the day you've selected.
c
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select a desired input source when the LED
display is turned on automatically. (USB can be selected
only when a USB device is connected to the LED display)
Aerial (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the desired
channel.
Music / Photo (when the Source is set to USB): Select a
folder in the USB device containing music or photo files to
be played when the LED display is turned on automatically.
✎
NOTE
x
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
x
When there is only one photo file in the USB, the
Slide Show will not play.
x
If a folder name is too long, the folder cannot be
selected.
x
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
x
It is recommended that you use a USB memory
stick and a multi card reader when using On
Timer.
x
The On Timer function may not work with USB
devices with a built-in battery, MP3 players, or
PMPs made by some manufacturers because
these devices take a long time to be recognized.
Page 27