Channel Menu - Samsung T19B300EW User Manual

Basic Features

Channel Menu

Retuning Channels
¦
MENUm → Channel → ENTERE
Aerial (Air / Cable)
t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the LED display.
Country
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
✎
Select your country so that the LED display can correctly
auto-tune the broadcasting channels.
Digital Channel: Change the country for digital channels.
■
Analogue Channel: Change the country for analogue
■
channels.
Auto Tuning
(depending on the country)
✎
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Channel Lock function, the
PIN input window appears.
Auto Tuning
■
– Air / Cable: Select the antenna source to memorise.
Digital & Analogue / Digital / Analogue: Select the
channel source to memorise.
✎
When selecting Cable → Digital & Analogue
or Digital: Provide a value to scan for cable
channels.
x
Search Mode(Full / Network / Quick): Selects
the Search Mode settings among Full /
Network / Quick.
x
Network (Auto / Manual): Selects the Network
ID setting mode among Auto or Manual.
x
Network ID: When Network is Manual, you
can set up Network ID using the numeric
buttons.
x
Frequency: Displays the frequency for the
channel. (differs in each country)
x
Modulation: Displays available modulation
values.
x
Symbol Rate: Displays available symbol rates.
Cable Search Option
■
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
– Start Frequency / Stop Frequency: Set the start or
stop frequency (differs in each country).
– Symbol Rate: Displays available symbol rates.
– Modulation: Displays available modulation values.
Manual Tuning
Scans for a channel manually and stores in the LED display.
✎
If a channel is locked using the Channel Lock function,
the PIN input window appears.
Digital Channel Tuning: Scans for a digital channel.
■
1. Press the ENTERE button to select New.
✎
When selecting Aerial → Air: Channel,
Frequency, Bandwidth
✎
When selecting Aerial → Cable: Frequency,
Modulation, Symbol Rate
2. Press the d button to select Search. When scanning
has finnished, a channel is updated in the channel list.
Analogue Channel Tuning: Scans for a analogue channel.
■
1. Press the ENTERE button to select New.
2. Set the Programme, Colour System, Sound System,
Channel and Search.
3. Press the d button to select Store. When scanning
has finnished, a channel is updated in the channel list.
Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a USB
storage to use this function.
Import from USB: Import channel list from USB.
■
Export to USB: Export channel list to USB. This function is
■
available when USB is connected.
✎
USB format should be FAT32.
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually. Scroll to the left or right until the image is clear.
✎
Settings are applied to the channel you're currently
watching.
✎
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the channel
number in the channel banner
✎
To reset the fine-tuning, select Reset.
22
English