Before cleaning the product, unplug
the power cord.
Otherwise, it may result in
electric shock or fire.
Avoid spraying cleansing agent
directly onto the product.
This may result in discoloration
or cracking of the exterior of the
product or the panel coming off.
If you can't get the product clean
with just the supplied cloth, use a
soft, damp cloth with a "monitor-
exclusive cleansing agent" and wipe
the product with it.
If no monitor-exclusive cleansing
agent is available, dilute a
cleansing agent with water at a
ratio of 1:10 before cleaning the
Since a high voltage runs through
the product, never disassemble,
repair or modify the product yourself.
Otherwise, it may result in fire or
If the product needs to be fixed,
contact a service centre.
When cleaning the product, do not
spray water directly over the product
When cleaning the product,
disconnect the power cord and clean
the product with the supplied cleaning
Since the exterior of the product is
easily scratched, be sure to use the
supplied cleansing cloth.
To move the product, turn the power
off and unplug the power cord, the
antenna cable and any other wires
connected to the product.
Make sure that water does not
enter the product.
Otherwise, it may result in fire,
electric shock or a problem with
Avoid using chemicals such as
wax, benzene, alcohol, thinner,
lubrication or cleansing agent
when cleaning the product.
This may result in the exterior
being deformed or the print being
Otherwise, it may result in electric
shock or fire due to the damaged