Download  Print this page

Picture Menu - Samsung T19B300EW User Manual

Syncmaster series 3 tb300, tv350 led tv monitor.
Hide thumbs


Table of Contents
Basic Features

Picture Menu

Changing the Preset Picture Mode
MENUm → Picture → Picture Mode → ENTERE
Picture Mode
Select your preferred picture type.
When connecting a PC, the Picture Mode is only available
the Standard and Entertain.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
It is only available when connecting a PC.
Adjusting Picture Settings
MENUm → Picture → ENTERE
Samsung MagicAngle
Adjust screen viewing Angle to optimize screen quality according
to your viewing position.
Samsung MagicAngle: When viewing the screen at an
angle from below or above by setting the appropriate mode
for each position you can obtain a similar picture quality as
viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean back mode: Select when viewing from a slightly
lower position.
Standing Mode: Select when viewing from the upper
Mode: Adjust screen viewing angle.
When Samsung MagicAngle is set to Lean back mode
or Standing Mode, Gamma is not available.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
In analogue TV, PC, AV modes of the PAL system, the
Tint (G/R) function is not available.
When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness.
Settings can be adjusted and stored for each external
device connected to the LED display.
Lowering picture brightness reduces power
Screen Adjustment
Picture Size: Your cable box / satellite
receiver may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most of
the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using u / d buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the
screen size.
Adjusts the Zoom or Position by using u / d
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre of
the screen may cause image retention (screen burn)
which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (720p / 1080i /
1080p) signals are inputted.
Adjusts the Position by using u / d / l / r button.
Depending on the input source, the picture size options
may vary.
The available items may differ depending on the
selected mode.
When connecting a PC, only 16:9 and 4:3 modes can
be adjusted.
Settings can be adjusted and stored for each external
device connected to an input on the LED display.
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and right
as in the overscan function.
Zoom / Position:You can adjust picture size and position
by u / d / l / r button.
It's only available when picture size is set as Zoom
and Wide Zoom.
In Wide Zoom mode, you can only use Position
Reset: Reset the Zoom and Position to the default
4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each
European country requires different picture size.
Not available in HDMI , Component, and HDMI/DVI


Table of Contents

   Related Manuals for Samsung T19B300EW

Comments to this Manuals

Symbols: 0
Latest comments: