Mic In; Installation - Omnitronic AZ-212A User Manual

In order to obtain highest sound quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.

Mic In

Here, you can connect dynamic microphones via balanced microphone-cables.
The microphone signals are connected via the XLR-socket.
Occupation balanced XLR-connection:
Input
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Line In
The Line In can either be connected via the balanced XLR mounting-socket.
Line Out
Connect the Line output via the balanced XLR-plug. The connection with the next active speaker should be
made via a microphone cable.

INSTALLATION

This speaker-system must only be installed at a solid, plane, anti-slip, vibration-free, oscillation-free and fire-
resistant location.
Balanced use with XLR connectors
2 1
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
3
For unbalanced use pin 1 and pin 3 have to be bridged
26/36
1 2
3
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
Output
00038393.DOC, Version 1.0