Table of Contents
Advertisement
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
Press and hold SCAN/CLOCK until the
frequency starts to change.
» All available stations are programmed in the
order of waveband reception strength.
» The first programed radio station is
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
•
To overwrite a programmed radio station, store
another one with its sequence number.
1
Tune to a radio station.
2
Press PROG to activate programming.
» The sequence number blinks.
3
Press
/
to allocate a sequence
number from 1 to 20 to this radio station,
and then press PROG to confirm.
» The preset sequence number and
the frequency of this radio station are
displayed.
4
Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press
/
to select the sequence number of
the preset radio station.
EN
14
Display RDS information
RDS (Radio Data System) is a service that
allows FM stations to transfer additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Mono/Stereo
» Time
Adjust FM settings
1
In FM mode, press MENU to access the
menu.
2
Press OK to access sub-menus.
3
/
Press
•
: Search for strong stations
only.
•
: Search for all stations no matter
whether the signal strength of a station
is strong or weak.
4
Press OK to confirm the option.
to select an option.
Advertisement
Table of Contents
