Tune To Fm Radio Stations; Program Radio Stations Automatically - Philips MCD183 User Manual

All manuals and user guides at all-guides.com
[Password Setup] > [Password Setup Page] >
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc, this
4-digit password is required.
‡ [On] - Enable the password for parental
control.
‡ [Off] - Disable the password for parental
control.
[Password Setup] > [Password Setup
Page] > [Password]
You can change password here. The default
password is 1234.
‡ [Change]
1) Press the numeric keys to enter '1234' or
your last set password at [Old Password] ÀHOG
2) Enter the new password at [New
Password] ÀHOG
3) Enter the new password again at >&RQÀUP
PWD] ÀHOG
4) Press OK to exit the menu.
Note
‡
If you forget the password, enter '1234' before you set
a new password.
22 EN
7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press TUNER.
3
Press and hold / .
4
When the frequency indication starts to
change, release the button.
» The FM tuner tunes to a station with
strong reception automatically.
5
Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press / UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.
Program radio stations
automatically
Note
‡
You can program a maximum of 20 preset radio
stations.
1
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] DXWR LV GLVSOD\HG EULHÁ\
» All available stations are programmed
in the order of waveband reception
strength.
» 7KH ÀUVW SURJUDPHG UDGLR VWDWLRQ LV
broadcast automatically.