Program Radio Stations Automatically; Program Radio Stations Manually; Tune To A Preset Radio Station; Adjust Sound - Philips BTM2280W/12 User Manual

Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
Press and hold PROG until the frequency starts
to change.
» All available stations are programmed in the
order of waveband reception strength.
» The first programed radio station is
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
•
To overwrite a programmed radio station, store
another one with its sequence number.
1
Tune to a radio station.
2
Press PROG to activate programming.
» The sequence number blinks.
3
Press / to allocate a sequence
number from 1 to 20 to this radio station,
and then press PROG to confirm.
» The preset sequence number and
the frequency of this radio station are
displayed.
4
Repeat steps 1-3 to program more
stations.

Tune to a preset radio station

Press / to select the sequence number of
the preset radio station.

8 Adjust sound

The following operations are applicable to all
supported media.

Select a preset sound effect

Press SOUND repeatedly to select a
•
preset sound effect.
• DSC1, DSC2, DSC3, DSC4, and DSC5

Adjust volume level

On the remote control, press VOL +/-
•
repeatedly.
• On the main unit, press VOL+/VOL-
repeatedly.

Mute sound

Press MUTE to mute or restore the sound.
•
EN
13