Table of Contents
Advertisement
Quick Links
Low Profile Service Jack
Model
GMG29031
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
© October 2017
U.S. Patent No. 6,199,379
WARNING
!
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic
jack. ALWAYS use a matched pair of
adequately rated jack stands.
Capacity
3 Ton
SFA Companies
GMG29031-M0_102017
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SFA GasMonkey Garage GMG29031
Summary of Contents for SFA GasMonkey Garage GMG29031
- Page 1 NEVER work on, under or around a load supported only by a hydraulic jack. ALWAYS use a matched pair of adequately rated jack stands. SFA Companies Read this manual and follow all the Safety Rules and Operating Instructions before using this product. © October 2017 GMG29031-M0_102017...
- Page 2 SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use and repair of this product may require special skills and knowledge.
- Page 3 WARNING WARNING • Study, understand, and follow all instructions before operating this device. • Do not exceed rated capacity. • Use only on hard, level surface capable of To avoid crushing and related injuries: supporting the load. • Never work on, under or around a load supported •...
- Page 4 OPERATION Lifting 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock each unlifted wheel in both directions to prevent inadvertent vehicle movement. 2. Close the release valve by turning the handle clockwise until firm resistance is felt. 3.
- Page 5 TROUBLESHOOTING Symptom Possible Causes Corrective Action Jack will not lift load • Release valve not tightly closed • Ensure release valve tightly closed • Load is too heavy • Consider higher capacity jack Jack will lift, but not maintain • Ensure release valve tightly closed •...
- Page 6 Not all components of this product are replacement items. When ordering parts, give model number, part number and description. Call or write for current pricing: SFA Companies Inc., 10939 N. Pomona Ave., Kansas City, MO 64153, U.S.A. Tel: (888)332-6419 Fax: (816) 891-6599.
- Page 7 29031-12 Handle 29031-13 Repair Kit, Hydraulic (**) Replacement requires special skills, knowledge, and equipment. Only an authorized service center may perform the repair and/or replacement of these items. SFA Companies ©2017 10939 N. Pomona Ave. Kansas City, MO 64153 888-332-6419...
- Page 8 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.
Need help?
Do you have a question about the GasMonkey Garage GMG29031 and is the answer not in the manual?
Questions and answers