1. Manuals
  2. Brands
  3. Appro Manuals
  4. Security Camera
  5. LC-6760
  6. User manual

Appro LC-6760 User Manual

Cube wi-fi network camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
 
 
Before trying to connect or operate this product, please read this manual completely.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC-6760 and is the answer not in the manual?

Questions and answers

Related Manuals for Appro LC-6760

Summary of Contents for Appro LC-6760

  • Page 1 User Manual     Before trying to connect or operate this product, please read this manual completely.

  • Page 3: Table Of Contents

    Table of Contents     PRODUCT FEATURES ................4   ................4 RODUCT NSTRUCTIONS   ................. 4 RODUCT EATURES     DESCRIPTION OF THE SURFACE ............5   ................5 ARDWARE   .................. 7 ESET UTTON   ..............7 LARM WIRING DIAGRAMS  ...
  • Page 4   ..............29 ONFIGURATION PAGES   Connecting the IP camera ......................29   Live Video ..........................31   Setup............................33     FREQUENTLY ASKED QUESTIONS ..........88     SPECIFICATIONS ................91   Appendix: The Playback Utility Tool-- CMS ..........93  ...
  • Page 5 SAFETY PRECAUTIONS All the following safety and operational instructions to prevent harm or injury to the operator(s) or other persons should be read carefully before the unit is activated. WARNING To prevent fire or shock hazard, avoid exposing this unit to rain or moisture. Do not block ventilation openings.

  • Page 6: Product Features

    1 PRODUCT FEATURES Product Instructions Here's a new series from APPRO -- cameras that act as basic watchguards in your premises -- lightweight, simple formatted, inexpensive, and no fuss to install. These watchkeepers are the ideal stuff for the safety of your home and office interiors.

  • Page 7: Description Of The Surface

    2 DESCRIPTION OF THE SURFACE The Hardware View The Front View Camera Lens: Records video of the surrounding area. Status LED: Indicates the camera's current status. WPS Status LED: Indicates the WPS connection status of the camera. While connecting, the blue LED will flash.
  • Page 8 The Rear View: DC-5V ETHERNET RESET Ethernet Port: This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. Power Connector: A DC 5V inlet that connects to an external power supply. DI/DO Connector: I/O connectors for connecting with external devices. Reset Button: Press and hold this button for 10 seconds to back to its factory default settings.

  • Page 9: The Reset Button

    The Reset Button You can use the Reset button to reset the camera operations back to default. Press the Reset button for about 10 seconds. Blue screens of the analog output are displayed, and a text saying RESETTING… appears. The Alarm wiring diagrams This is a 4-PIN connector including the Digital output/input, DC output and GROUND items for connecting with external devices.

  • Page 10: Installation

    3 INSTALLATION Please follow the instructions and the diagram below to set up the system. Hardware Installation Connect Ethernet cable to the rear panel of the camera. DC-5V Plug in the power connection to the camera. ETHERNET Confirm the correct network connection status. RESET WPS - Push Button Setup To create a WPS connection:...

  • Page 11: Software Installation

    Software Installation Before installing the apps to your mobile phone for remote surveillance, make sure that you have checked the following: Your mobile platform is or Android. You might be charged for Internet access via wireless or 3G/4G networks. For the Internet access rate details, please check with your local network operator or service provider.

  • Page 12: Configuration-Android Operating System

    Configuration—Android Operating System Browse to where AppPro is installed by default on your mobile phone when the installation is completed. Find AppPro and activate it. Add Camera Camera List Two methods to add a new camera. Start to monitor. Scan QR code of the camera: You can Choose the camera you want to access just scan the QR code to add a camera.
  • Page 13 Configuration- Setting Configuration- Change Password Change the settings of resolution, video mode, You can change the Password here. Click Yes to video area, FPS, audio mode and enable/disable activate it. Please use the new password to everse Image function. Then click ✔. connect the camera by using this app next time.
  • Page 14 Configuration- Remote Storage (SD card) Remote Storage- Normal/ Alert Record List You can view/ download the saved video clips This allows you to search a recorded video and images in the SD card here. stored in the SD card of the camera. Click the Note: Please insert an SD Card to the camera date and press the hour button to proceed.
  • Page 15 Info Live Set the Video time limit from 1, 3 and 5. Enable/disable 2-way audio function. Live- the icons Live- Screen Orientation Click on to record a video clip. Click on to take a snapshot. Click on to start/stop audio out.

  • Page 16: Configuration-Ios Operating System

    Configuration—iOS Operating System Browse to where AppPro is installed by default on your mobile phone when the installation is completed. Find AppPro and activate it. Add Camera Camera List Two methods to add a new camera. Start to monitor. Choose the camera you want to access Scan QR code of the camera : You on the camera list.
  • Page 17 Camera Functions- Revise Password Camera Functions- Local Storage You can change the Device ID and Password You can view the saved video clips and images in your mobile device here. here. Select “ ” on the screen to activate it. Camera Functions- Camera Settings Camera Functions- Notification Setup When push notification is enabled, the user can...
  • Page 18 Camera Functions- Notification Events Camera Functions- Remote Storage (SD card) This page shows the event list of your camera. You can view/ download the saved video clips and images in the SD card here. Note: Please insert an SD Card to the camera first.
  • Page 19 Live Live- the icons The function of icons: Click to record a video clip. Click to start/stop audio out function. Click to start/stop two-way audio. Click to take a snapshot. Click to select the Day & Night mode from: (Auto mode), (Night mode) and (Day mode).

  • Page 20: Updating System Software

    Updating System Software If the system software of the IP Camera needs to be upgraded, please take the following steps to safely process it. Important: Before carrying out the following procedures, please ensure the SD card is working and the file of the system firmware is intact Create a directory named UPGRADE (upper-case or lower-case letters are no difference) in the SD card if it does not exist.

  • Page 21: Network Configuration

    4 Network Configuration Cable Connections Please follow the instructions below to connect your IP camera to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the RJ-45 cable for Ethernet Wire Type Cat.
  • Page 22 Note When connecting to a network, each connected IP camera must be assigned a unique IP, which must be in the same class type as your network address. IP addresses are written as four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if the connected network is identified as Class C, for example, the first three sets of numbers of the IP camera IP address must be the same as the network address.

  • Page 23: Tcp/Ip Communication Software

    TCP/IP Communication Software Follow the procedure below to install the TCP/IP communication program in your computer. Click Start, and then click Control Panel. Double click the Network Connections icon to enter the windows. Right-click your network connection and then click Properties.
  • Page 24 On the General tab, check if the Internet Protocol (TCP/IP) is included in the list. If the TCP/IP is included, please process section 4.5. If it is not included, please follow section 4.4 to install the TCP/IP.

  • Page 25: Tcp/Ip Installation

    TCP/IP Installation On the General tab of the Connection Properties, under “This connection uses the following items”, click Internet Protocol (TCP/IP). Then click Install. Select Protocol from the network component type then click Add. Select Microsoft TCP/IP from the network protocol then click OK. Click Close to return to the Network Connections window.

  • Page 26: Tcp/Ip Configuration Setting

    TCP/IP configuration setting Click Start > Control Panel > Network Connections. Select Internet Protocol (TCP/IP), and then click Properties. Before processing the IP camera installation in a WAN, please make sure the Internet connection works properly. If not, please contact your ISP provider. 　...

  • Page 27: Connection Testing

    Connection Testing With the previous settings, follow the instructions below to ensure whether you have established the connection successfully. Click Start > All Programs > Command Prompt. Enter ping XXX.XXX.XXX.XXX (the camera’s IP address), then enter. (See the sample screen below). ** This is the IP address for an IP camera that is assigned for the connected IP camera.
  • Page 28 If you receive a response as in the sample screen below, the connection hasn’t been successfully established. Please re-check all the hardware and software installations by repeating last two sections. If you still can’t establish the connection after rechecking, please contact your dealer.

  • Page 30: Configuration Using A Web Browser

    5 Configuration Using A Web Browser The configuration pages accessed with a web browser provides the functions of configuring, monitoring remote zones or watching recorded data through the TCP/IP protocol. The details are listed as follows. RJ-45 PIN configuration for Ethernet PIN NO.

  • Page 31: Web Configuration Pages

    Web Configuration pages Connecting the IP camera Start Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, etc. Click on the URL block at the top of the window. Enter the URL address of the IP camera into the URL block and press the “Enter” button to enter the home page.

  • Page 33: Live Video

    Live Video The Live Video from the IP camera is displayed on the home page when your PC is online with the IP camera. There are also additional settings provided on the home page. The AJAX (default) and the ActiveX viewer types display different display formats on their home page. The AJAX viewer type: Non-IE browsers support (for the JPEG mode only).
  • Page 34 SD card. Alarm on-icon: When there is a detection of external devices such as a sensor, The icon will appear on the upper right corner warn the user. When an alarm is triggered, the icon will blink red The ePTZ control panel: Click to start the electronically pan, tilt, and zoom (ePTZ) within the camera's predefined view area, if one has been defined.

  • Page 35: Setup

    Setup The ActiveX viewer type: You can select from the available thumbnails for your option of taking a Snapshot, setting the Storage Folder, selecting the Full Screen mode, Recording, Listen, Talk and Zoom. Snapshot: Click on the button to take a snapshot. The icon will change to a blue color while working effectively.
  • Page 36 Talk switch: Click on the button to start/stop audio out function (talk/stop talking). The icon will change to a blue color while working effectively. Digital output: Click on the button to start/stop digital output. The icon will change to a blue color while working effectively.
  • Page 37 5.1.3.1 Wizard To quickly configure your IP Camera, click Wizard on the top of the Setup pages. This wizard will guide you through a step-by-step process to configure your new camera and connect the camera to the Internet. Click Next to continue. Step 1: The IP Camera default setting is DHCP On.
  • Page 38 Click Next to continue. Step 2: If you are using PPPoE, select Enable and enter your user name and password, otherwise select Disable and click Next to continue. Step 3: If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable and enter your host information.
  • Page 39 Step 4: Enter a name for your camera and click Next to continue. Step5: Configure the correct time to ensure that all events will be triggered, captured and scheduled at the right time. Click Next to continue. Step 6: If you have selected DHCP, you will see a summary of your camera’s settings. Please note down all this information as you will need it for accessing your camera within the network.
  • Page 40 Change Image Setting Please follow the steps below to change the video setting through the network as necessary. A preview of the image will be shown in the window of Live Video. Click Submit to activate and save your changes. The Image Setup setting page 1.
  • Page 41 3. Adjust the ”Image Settings”, including “Exposure Time“, “Denoise”, “Mirror”, “Flip”, “White Balance”, “Brightness”, “Contrast”, “Saturation” and “Sharpness” as necessary. 4. Adjust the ”Device Settings” including “Device Name” and “Timestamp”. • Click “Enable OSD” to checkmark the box and activate the function. •...
  • Page 42 The Audio and Video setting page 1. Click on the Audio and Video button to enter the Audio and video page to set the details of the device. You may configure video profiles with different settings for your camera. Hence, you may setup different profiles for your computer and mobile displays.
  • Page 43 2. Select the Profile Number from 1-2. Then set the Aspect ratio of 4:3 or 16:9. Click Save to activate it. 3. Set the “Mode”, “Frame size”, “Viewer window area”, “Maximum frame rate” and “Video quality” of the Video Profile as necessary. 4.
  • Page 44 Connect the Mic to the PC, and connect the camera Audio out to the speaker. Select “Talk” ; speak to the PC-connected microphone. Confirm the sounds made in the camera-connected speaker. Connect the Mic to the camera--Audio in; connect the speaker to the PC—AUDIO Out.
  • Page 45 The Privacy Mask setting page Click on the Privacy Mask button to enter the Privacy Mask Area setting page. Mask 3 privacy area(s) on video to specify up to the area(s) on the camera's image to be blocked/excluded from recordings and snapshots. 1.
  • Page 46 5.1.3.3 Change the Network Setting Please follow the steps below to change the network setting through the network as necessary. Set the network options and IP address. Click on the Network button in the home page to enter the Network Setup page. The accessible networks here are the “PPPoE”, “Port Detail”, ”Traffic”, “Dynamic DNS”, “HTTPS”...
  • Page 47 Change the Network Setting — Wireless Setup. The “Network” page has, on its upper left, the “Wireless Setup” icon. This section allows you to set up You may choose which wireless network for the and configure the wireless settings on your camera. connection using the pull-down menu of Site Survey or enter the SSID manually.
  • Page 48 Wireless Mode Use the drop-down box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer. Channel If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto.
  • Page 49 Change the Network Setting — PPPoE. The “Network” page has, on its upper left, the “PPPoE” icon. Please follow the steps below to change the PPPoE setting through the network as necessary. Click on the PPPoE button on the upper left menu to enter the “PPPoE Settings” page. Active the “Enable”...
  • Page 50 Change the Network Setting — Port Detail. The “Network” page has, on its upper left, the “Port Detail” icon. It allows you to specify and reserve the ports for both the HTTP and RSTP streaming. Please follow the steps below to change the Port Detail setting through the network as necessary.
  • Page 51 Description of function keys: HTTP Port HTTP ports allow you to connect to the camera via a standard web browser. This port can be set to a number other than the default HTTP port 80. A corresponding port must be opened on the router. For example, if the port is changed to 8080, users must type in the web browser 'http://192.168.0.100:8080' instead of 'http://192.168.0.100'.
  • Page 52 Change the Network Setting —Network Traffic. The “Network” page has, on its upper left, the “Traffic” icon. Specifying the maximum download/upload bandwidth for each socket is useful when connecting your device to a busy or heavily loaded network. Please follow the steps below to change the setting through the network as necessary. 1.
  • Page 53 Change the Network Setting — DDNS. The DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The user name and password are required when using the DDNS service.
  • Page 54 Host Name: Enter the host name of the DDNS server. User name: Enter your user name or e-mail used to connect to the DDNS Password: Enter your password used to connect to the DDNS server. Verify Password Enter your password again to connect to the DDNS server. Timeout: Enter the DNS Timeout values for registering the IP address.
  • Page 55 Change the Network Setting — HTTPS. The “Network” page has, on its upper left, the “HTTPS” icon. Please follow the steps below to change the HTTPS setting through the network as necessary. Click on the HTTPS button on the upper left menu to enter the “HTTPS Setting” page. Mark the “Enable HTTPS secure connection”...
  • Page 56 Methods of creating and installing the certificate: 1. Create self-signed certificate automatically Before using HTTPS for communication with the IP camera, a Create self-signed certificate automatically: (1) Enable HTTPS secure connection. (2) Select the “Create self-signed certificate automatically” option. (3) Click the Create button. (4) The new Certification Information will show in the third column on the HTTPS setting page.
  • Page 57 Change the Network Setting —Access List. The “Network” page has, on its upper left, the “Access List” icon. Please follow the steps below to change the Access List setting through the network as necessary. 1. Click on the Access List button on the upper left menu to enter the “Access List” page. 2.
  • Page 58 Note If there are any conflicts between the range of the Allow List and the range of the Deny List, the Access List within the range of the Deny List has the higher priority over the range of the Allow List.
  • Page 59 5.1.3.4 Change the System Setting Please follow the steps below to change the date and time of the system setting through the network as necessary. Set the Time and Date of the system 1. Click on the System button to enter the “Time And Date” page (default). From this section, you may automatically or manually configure, update and maintain the internal system clock for your camera.
  • Page 60 Description of function keys: Time Zone: Select your time zone from the drop-down menu. Enable Daylight Saving: Select this to enable the daylight saving time. Auto Daylight Saving: Select this option so that your camera will configure the Daylight Saving setting automatically. Set date and time manually: Select this option so that you may configure the Daylight Saving date and time manually.
  • Page 61 Change the System Setting — Digital Input &Output. You may enable the Digital Input (D/I) and Digital Output (D/O) feature and configure the source of events for your camera. 1. Click on the DI and DO button on the left side of the “System” page to enter the “DI and DO” page. 2.
  • Page 62 Change the System Setting — ICR. Please follow the steps below to change the IR cut function through the network as necessary. Click on the ICR button on the left side of the “System” page to enter the “ICR” page. For the “IR-Cut Removable filter trigger condition”, mark your options from “Automatic”, “Day Mode”, “Night Mode”...
  • Page 63 Change the System Setting — Users. You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create the unique name and configure the OSD setting for your camera.
  • Page 64 Change the System Setting — Maintenance. Please follow the steps below to change the system setting through the network as necessary. Click on the Maintenance button on the left side of the “Date and Time” page to enter the “Maintenance” page.
  • Page 65 Change the System Setting — Update Firmware. Please follow the steps below to update the firmware through the network as necessary. Click on the Firmware Upgrade button on the left side of the “Date and Time” page to enter the “Firmware Upgrade”...
  • Page 66 1. Quit Internet Explorer and quit any instances of Windows Explorer. 2. Click Start, click Control Panel, and then double-click Internet Options. 3. On the General tab, click Delete Files under Temporary Internet Files. Select the Delete all offline content check box in the Delete Files dialog box, and then click 5.
  • Page 67 5.1.3.5 Change the Application Setting Please follow the steps below to change the application setting through the network as necessary. Change the Application Setting —Language Setting. Please follow the steps below to change the Language setting via the network as necessary. Click on the Language button on the left side to enter the “Language Setting”...
  • Page 68 Change the Application Setting —Motion And PIR. Please follow the steps below to enable changes in the motion detection function of the alarm through the network as necessary. Set the motion detection: Click on the Motion and PIR button on the left side of the Alarm to enter the “Motion Detection”...
  • Page 69 Change the Application Setting —ePTZ. This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set.
  • Page 70 Enter the name of the preset you want to create, then click the Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, Input Preset Name: then clicking the Rename button.
  • Page 71 Change the Application Setting —Event. In this section, you can configure and schedule the recording setting for your IP camera. Click on “Add” to enter the setting pages of the Server, Media, Event and Recording to make the advanced settings. Or click on “Delete” to erase the settings. The Event Setup page includes 4 different sections: Server, Media, Event and Recording.
  • Page 72 Server: Click on the Add button in the Server column to enter the “Server” setting page. Enter the Server name, the unique name for a server. There are four kinds of servers supported. They are email server, FTP server, HTTP server and network storage. Set the details of the Email.
  • Page 73 for uploading. "Passive Mode": Check it to enable the passive mode in transmission. Set the details of the Network storage. Only one network storage is supported. "Network storage location": The path to upload the media. "Workgroup": The workgroup for network storage. Click on the SD card to activate the function.
  • Page 74 FTP: Select to send the media files to an FTP server when a trigger is activated. Server address: Enter the domain or IP address of the FTP server. Port: The default FTP server port is 21. It can also be assigned to another port number.
  • Page 75 SD card: Select to send the media files to an SD card when a trigger is activated. Insert your SD card first. To verify if the storage setting is correctly configured, click the Test button. The result will be shown in above this setting page (TEST OK or TEST ERROR).
  • Page 76 Media: Click on the Add button in the Media column to enter the “Media” setting page. Enter the Media name, the unique name for media. There are three kinds of media: snapshot, video clip and system log. Set the details of the Snapshot. "Source": Select the video source.
  • Page 77 "Maximum duration": The maximum recording file duration in seconds. "Maximum file size": The maximum file size would be generated. Click on the System log to activate the function. Click on “Submit” to save, or click on “Don’t Submit” to go back to the Event main page. Media settings: Click Add under the Media column on Event Settings page to open the Media setting page.
  • Page 78 Snap_20150101_122030 The prefix file name Date and time suffix The format is: YYYYMMDD_HHMMSS Add date and time suffix to file name: Select the option to add the date/ time suffix to the file name. Click Submit to activate the setting. Video Clip: Select to send video clips when a trigger is activated.
  • Page 79 System log: Select to send a system log when a trigger is activated. Click Submit to activate the setting. When completed, click Submit to enable the settings to exit this page. The new media settings will appear on the Event Settings page. Note To remove a media setting from the list (Application>...
  • Page 80 Event: Click on the Add button in the Event column to enter the “Event” setting page. Enter the Event name. Checkmark the “Enable this event” box and activate the function. Then set the Priority and the Source from the drop-down list. "Priority": The event with higher priority will be executed first.
  • Page 81 Set the recording schedule time. Set the Trigger D/O of activating the action. Check it to trigger digital output for specific seconds when an event is triggered. Click on “Submit” to save or click on “Don’t Submit” to go back to the Event main page. Event settings: Click Add under the Event column on Event Settings page to open the Event setting page.
  • Page 82 other defined minute(s). UP to 99999 minutes. Digital input: This option allows the IP camera to use an external digital input device or sensor as a trigger source. Depending on your application, there are many choices of digital input devices on the market which helps to detect changes in temperature, vibration, sound, and light, etc.
  • Page 83 Recording: Click on the Add button in the Recording column to enter the “Recording” setting page. Enter the Recording entry name. Checkmark the “Enable this recording” box and activate the function. Enable this option if you want to upload the recording to a shared folder in the network.
  • Page 84 Record settings: Click Add under the Record column on Event Settings page to open the Record setting page. In this page, you can define the recording source, recording schedule and recording capacity. A total of 2 recording settings can be configured. Enter the Record entry name for the event setting.
  • Page 85 5.1.3.6 Change the Storage Setting Please follow the steps below to change the SD card setting through the network as necessary. Change the SD card Setting. Please follow the steps below to change the setting via the network as necessary. Click on the “storage”...
  • Page 86 5.1.3.7 Status The device information. This page displays all the information about your device and network connection. Click on the “Device info” button of the Status page to enter the “Device info” screen.
  • Page 87 The device information. This page displays the log information of your camera. Click on the “Device info” button of the Status page to enter the “Device info” screen. Click on the “Clear “ to erase all of the logs. You may also download the information by clicking “Download”.
  • Page 88 PPPoE & DDNS Using the PPPoE Install the XDSL software (obtained from your ISP dealer) in your PC. Search your IP camera's IP address: you can connect the IP camera and the Video monitor. The monitor screen will show the IP address on its right side. Turn off the DHCP function (of the IP camera) if it is “ON”.
  • Page 89 Desktop → IE browser → Enter the IP camera IP address (the same address as in the PPPoE settings and step 3 above) → You can see the IP camera images. DDNS settings Check your IP camera’s IP address (monitor) → open your IE browser → Use the address to connect to the IP camera or view the images →...

  • Page 90: Frequently Asked Questions

    6 FREQUENTLY ASKED QUESTIONS Question 1: How do I view live images of the IP camera via the Internet Explorer on a Desktop PC or a laptop computers in a situation where there are no monitors? ◇To get the IP address of the IP camera without a monitor, use one of the following two methods to get the IP address: UPnP.
  • Page 91 will display the response signal in the Live Video and Video Out. Question 5: How do I use the DynDNS to connect the IP camera by using its Sub Hostname via the intranet? ◇Set the DDNS function 1. Click the Network button on the home page. 2.
  • Page 92 ◇Modify the user 1. Click the user name you want to modify from the USER LIST. 2. Enter the password, the confirmed password and choose authority level. 3. Click the Add/Modify User button to submit new setting. ◇Delete a user 1.

  • Page 93: Specifications

    7 SPECIFICATIONS Model LC-6760 Lens Fixed Focal Board Lens f:3.6mm F2.0. Minimum illumination Color: 1.0 lux, B/W: 0.5 lux. Camera IR cut filer Day & Night Auto / Day / Night / Schedule. Video Compression H.264 / MJPEG. - “4:3”: 960x720, 800x592, 640x480, 480x360, 320x240.
  • Page 94 Recording SD card, SAMBA, FTP Pre-alarm recording Yes. Advanced motion 512 zones. Sensitivity: 0 - 100 %. Motion Detection Alarm Schedule Trigger Alarm input Ethernet loss Notification SD card recording, SMTP, FTP, HTTP, alarm output. RJ-45 10 BASE - T / 100 BASE -TX. Digital I / O 4 pin-contact terminal block (DO, DI, 5V, GND) Connectors...

  • Page 95: Appendix: The Playback Utility Tool-- Cms

    Appendix: The Playback Utility Tool-- CMS This section provides instructions for installing and using the CMS which is included with the device. Introduction to the CMS The CMS allows you to access many units of the device from a remote desktop or a laptop in a TCP/IP networking environment.

  • Page 96: Start To Use The Cms

    Start to use the CMS Once the connection has been established, the software will discover the connection of the devices in the LAN. The Device Auto Scan screen will display the connection of the all-type device. Please enter the password and click OK to add the new device.
  • Page 97 View the video from a remote PC Use the CMS to browse the video from a remote location. Search and add a new camera The user can manually add a new connection of the camera in the LAN. Click the Setup button to open the Setting window. Click Rescan, then select and drag the camera into the quad-monitoring area.

  • Page 98: Operation

    Operation Live View Once the connection has been established, you will see the Live View window (see the sample screen below).
  • Page 99 The live view area. Note Pop-menu: You can use the mouse to move to each channel. Click the right key of the mouse to show a window. You can select "Full Screen", "Capture" or “Print”. Double-click the red frame live-viewing window to switch between single or quad channel modes.

  • Page 100: Playback

    Playback The Playback window (see the sample screen below). The display area. Note Pop-menu: You can use the mouse to move to each channel. Click the right key of the mouse to show a window. You can select "Full Screen", "Capture" or “Print”. Select the division mode of the live view area: Single View, Quad View, Actual View and Full Screen.

  • Page 101: Settings

    deactivate. Use the scroll bar to control the volume. The playback function bar. You can click or pull the indicator on the scroll bar to the point you want to see. 10. Click to minimize the window or turn off the software. Settings Press the Setup button to enter the Setting page.
  • Page 102 PIR Detection Select the camera from the list to activate its PIR detection function. Click OK to confirm. Motion Detection Select the camera from the list to activate its motion detection function. Click and drag the mouse across a targeted zone to draw a red rectangle on the image. Every cell in the grid represents a detection area.
  • Page 103 Storage Setting Set the directory for saving the recording data. You can set the reserved hard disk space by using the scroll bar. Click on the OK button to submit the new setting of the storage setting. Note The recorded data of the camera will be automatically downloaded to the user’s computer for backup.
  • Page 104 General Setting Language You have an option as to which language to use. Choose your selected language from the drop-down list. This page displays the log information of your camera. Click on the “Clear“ to erase all of the logs. You may also download the information by clicking “Save as”.
  • Page 105 RMN_V1.0...

Table of Contents