Appro LC-7524 Quick Start Manual

Ultra Low-light Color Cameras--
The Component Parts (the internal
1 2 3 4 5 6
1. Plug Inlet: A DC 12V inlet that connects to an external power supply.
2. Plug Inlet: An AC 24V inlet that connects to an external power supply.
3. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100
Mbps Ethernet networks. PoE (Power over Ethernet) function: Provides power to
the device via the same cable as used for the network connection.
4. AUDIO IN: The connector is used to connect the audio output from other devices
to the camera.
5. VIDEO OUT Connector (RCA): This output provides the unit's composite video
signal to a Composite/Analog input. (This connector is used for service to adjust
and improve the image.)
6. AUDIO OUT: Provides the camera's audio signal to a speaker or stereo.
7. GPIO: This is a 6-PIN connector including the Digital output/input, DC output
and GROUND items for connecting with external devices.
8. USB port: The user can use a USB device cable to connect the IP camera to the
USB port on the PC.
9. SD/ SDHC CARD slot: This is used for updating system software and archiving /
accessing critical images.
10. RESET: Recover to factory default.
view)DESE
8
9
10
7
Fixed IP Indoor Mini-Dome
The Alarm Wiring Diagram
+12V
1
+12V
RMN0100900