Advertisement
M
o
d
l e
Output Power (RMS 1% )
Frequency Response
Hum and Noise
Input Impedance
Input Levels
Line Out
Tone controls (EQ Centers) 60Hz, 800Hz, 10kHz
Crack
AC Power Requirements
Speakers
Dimensions English In.
Dimensions Metric cm
Weight
KDA200 Specifications
K
D
A
2
0
0
200W/8 ohm X 1
500mW/32 ohm X 2
20-20KHz
-55 dBV
-50 dBV
10K ohms
All measurements made at 1 kHz, EQ controls flat and volumes Max.
-16 dBV
-10 dBV
-10 dBV
-10 dBV
0 dBV
3.5KHz centered
400 W
14 W
1 x 12 inch woofer
1 x 1inch Compression driver
16 1/2" Deep, 18" Wide, 19" Tall (including feet)
420mm Deep, 455mm Wide, 480m Tall (including feet)
44.25 lbs/20.1 Kg
Powered Drum Monitor
Internal Speakers
Output to Headphones (Mono Mix)
Actual response is tailored for accurate acoustic
response for electronic drums
all controls turned down
all controls turned halfway
All Inputs
INPUT 1 to achieve full output
INPUT 2 to achieve full output
AUX IN to achieve full output
3.5mm LINE IN to achieve full output
Post Input 1, 2 Aux In. Pre EQ, 3.5mm Line In
3 band, 12 dBV, Center Flat
CCW (min.) flat, CW (max.) +12dBV
At full output
At idle
Special design 8 ohm rated 200W RMS
20W Neodymium magnet, Phenolic diaphram
Advertisement
