Page 1
Congratulations on the purchase of your new Kustom bass amplifier. Your KXB Model draws on decades of amp design and manufacturing experience at Kustom. This model was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications.
FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 5
KXB20 Control Panel KXB20 1. Input 1: ¼-inch input that is intended for bass guitars but will accept other instruments as well. 2. Input 2: ¼-inch input that is wired in parallel with Input 1. Both inputs may be used at the same time, if desired.
Page 6
KXB20 Back Panel KXB20 Power Cord: This supplies AC power to the amplifier. If the cord becomes damaged, take the amplifier to an authorized service center for repair. kustom.com...
Page 7
KXB20 Suggested Settings The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to get you up and running with your KXB amplifier. Feel free to experiment to achieve your own signature sounds.
Page 8
Kustom KXB20 Specifications ® Output Power 20 Watts 6 Ohms at 10% THD+N Speaker 1 X 12” Custom Designed 6 Ohms Input Impedance Dual Input both 0dB Greater than 200K Ohm Gain 44 dB Volume @ Max, All EQ at 12 o’clock...
Need help?
Do you have a question about the KXB20 and is the answer not in the manual?
Questions and answers