Page 1
Congratulations on the purchase of your new Kustom bass amplifier. Your KXB Model draws on decades of amp design and manufacturing experience at Kustom. This model was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications.
FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 5
KXB1 Control Panel KXB1 1. Input Jack: ¼-inch input that is intended for bass guitar but will accept other instruments as well. 2. Volume: Adjust this control to set the desired volume level of the amplifier. Note: If you are using an instrument with a built-in active preamp, set its level to mid-position before increasing its volume or distortion may occur.
Page 7
KXB1 Suggested Settings The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to get you up and running with your KXB amplifier. Feel free to experiment to achieve your own signature sounds.
Page 8
Kustom KXB1 Specifications ® Output Power 10 Watts 4 Ohms at 10% THD+N Speaker 1 X 6” Custom Designed 4 Ohms Input Impedance Single Input 470K Ohm Gain 48 dB Volume @ Max, All EQ at 12 o’clock S/N Ratio...
Need help?
Do you have a question about the KXB1 and is the answer not in the manual?
Questions and answers