Table of Contents
Advertisement
Usage method
使用方法
Turn on the water and insert clothes→(P.17、18)
Preparations
打開水龍頭，放入衣物 →(P.17、18)
準備
1
Press
to turn on the power
按下
，接通電源
2
Press
to select a program
按
選擇程序
A different program is selected each time it is pressed.
每按一次更改所選的程序。
Detailed settings →(P.24)
詳細設定 →(P.24)
3
Press
and set when operation is to stop
按下
，設定完成洗衣時間
4
Press
按下
The machine will automatically detect the amount of clothes present and then display the amount of water and
detergent required (reference only). →(P.20)
將自動檢測洗衣量，然後顯示水位和洗衣劑量(參考)。→(P.20)
If water has already been added to the washing
如果已事先在洗衣 • 脫水槽中放好水，則不會檢測。
5
Add the recommended amount (reference only) of detergent,
bleach, and fabric softener, and then close the lid →(P.19～22)
按照洗衣劑量(參考)
放入洗衣劑、漂白劑和柔順劑後關閉機蓋 →(P.19～22)
After the wash settings are displayed, only "pre-scheduling" is lit.
顯示洗衣內容後，只有「預定」點亮。
6
After washing is complete, remove the clothes
and clean the lint fi lter →(P.50)
完成洗衣後，取出衣物，
清潔棉絮過濾器 →(P.50)
spinning basket, then the machine will not perform detection.
•
47
Advertisement
Table of Contents
