Advertisement
Icemaker and dispenser working principles and repair
2. Function TEST
1.
CAUTION!
Before you carry out the test mode, check whether the water is frozen in the icemaker completely. If the test is
performed while the water is not frozen in the icemaker, The water may overflow after test and it will cause other serious
problem.
2. This is a forced operation for TEST, Service, cleaning, etc. It is operated by pressing and holding the Test Button for 3
seconds.
3. The test works only in the Icemaking Mode. (This test works when the ejector and stainless lever is at the their original
position.)It cannot be entered from the Harvest or Fill mode.
→
→
→
→
4. After water is supplied, the mormally CYCLE is followed : Icemaking
Checking full ice
Harvest
Fill Water
Park Position
Advertisement
