Advertisement
Alarm Feature Programming (Part 2)
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the next feature.
One Chirp
Button
LED One Pulse
(Factory Default Setting)
0.8 Second
Door Lock Pulses
Ignition Controlled
Door Lock & Unlock
Pathway Illumination
Feature "Off"
Brown Wire
Constant Siren Output
Disables the Out-of-
+
Range Check
Button
One Chirp, LED One Pulse
(Factory Default Setting)
Turbo Timer Control
Function is Off.
The alarm can not be armed
while the engine is running.
+
Four Chirps, LED Four Pulses
Built-in Turbo Timer Control is
Press the (
before removing the ignition key
to activate the 1 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be by-passed.
Step 4
18
Remote Feature Programming
Two Chirps
LED Two Pulse
3.5 Second
Door Lock Pulse
Ignition Controlled
Door Lock Only
Parking Light "On" for
30-Seconds Upon an
Unlock Signal
Brown Wire
5-Second Pulse
Siren Output
Enables the Out-of-
Range Check
Active
+
) buttons
Turn On the Ignition
3 long chirps & 3 flashes of the
parking lights will confirm exit of
ON
the programming mode.
Step 3
LED Three Pulse
Double Pulse Unlock
Ignition Controlled
Door Unlock Only
Parking Light "On" for
30-Seconds Upon an
Unlock Signal & 10 Second
Upon a Lock Signal
Two Chirps, LED Two Pulses
The vehicle has an aftermarket
turbo timer installed.
The alarm system can be armed
with the engine running. The
shock sensor will be bypassed
as long as the engine is running.
Five Chirps, LED Five Pulses
Built-in Turbo Timer Control is
Active
Press the (
+
) buttons
before removing the ignition key
to activate the 3 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be by-passed.
Three Chirps
Without Ignition Controlled
Door Lock and Unlock
No Function
Three Chirps, LED Three Pulses
The vehicle has an aftermarket
turbo timer installed.
the alarm system can be armed
with the engine running. The
shock sensor will be bypassed
for 3 minutes.
Six Chirps, LED Six Pulses
Built-in Turbo Timer Control is
Press the (
before removing the ignition key
to activate the 5 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be by-passed.
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Four Chirps
LED Four Pulse
Door Lock with
"Comfort Feature"
See Note Below
Brown Wire
Horn Output
Active
+
) buttons
Advertisement
