Picture Adjustment; Custom(Manual) Adjustment - Sanyo AVM-32F4 Instruction Manual

PICTURE ADJUSTMENT

P.STD (Picture Standard) BUTTON
By pressing the P.STD button on the remote control, you can sequentially select one of four
preset picture standards.
(1) CUSTOM mode
(2) STANDARD mode
(3) DYNAMIC mode
(4) MILD mode
MODE
Select this mode to use your customized picture setting.
CUSTOM
See next page.
Select this mode to use the
STANDARD
factory-preset standard picture setting
Select this mode
DYNAMIC -To emphasize more contrast.
-To watch in brighter (daylight) environments.
Select this mode
- For soft contrast.
MILD
- When the room is dark.
- To lessen eye fatigue.
18
All manuals and user guides at all-guides.com
PICTURE
PICTURE ADJUSTMENT
CUSTOM (MANUAL) ADJUSTMENT
You can sequentially select and adjust one of five picture properties.
Contrast, Brightness, Sharpness , Color, or Tint.
1 1
1 1
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE
: SEL + : ENTER : EXIT
2 2
2 2
PICTURE
CONTRAST : 90
BRIGHT : 50
SHARPNESS : 50
COLOR : 50
TINT : 0
: SEL. : ADJ : PREV.
3 3
3 3
CONTRAST 90
4 4
4 4
19
Press the MENU button. Move the
cursor to PICTURE by pressing the CH
/ buttons and press the VOL +
button.
Move the cursor to CONTRAST by
pressing the CH / buttons and
press the VOL + / - buttons.
Adjust " CONTRAST " with VOL + / -
buttons.
When you have finished contrast
adjustment, press MENU repeatedly until
the menus disappear.