(in Channel Manager)
You can view, modify or delete a show you have reserved to
■ Change Info: Change a show you have reserved to
■ Cancel Schedules: Cancel a show you have reserved
■ Information: Display a show you have reserved
to watch. (You can also change the reservation
■ Select All / Deselect All: Select or deselect all reserved
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
Fine tuned channels are marked with an asterisk "*."
To reset the fine-tuning, select Reset.
Changing the Preset Picture Mode
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal
■ Movie: Suitable for watching movies in a
Adjusting Picture Settings
Cell Light / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
Settings can be adjusted and stored for each
external device connected to the TV.
■ Energy Saving (Off / Low / Medium / High /
the TV in order to reduce power consumption. If you
select Picture Off the screen is turned off, but the
sound remains on. Press any button except volume
button to turn on the screen. Until the screen turns on
again, a distorted picture will be displayed for about 4
■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it's not receiving a signal.
Changing the Picture Options
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
RGB Only Mode
: This adjusts the brightness of
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
E Enter R Return