Vectaire ELEGANCE EL1003 Installation And Operating Instructions Manual

Vectaire ELEGANCE EL1003 Installation And Operating Instructions Manual

Low carbon with ec motor

Advertisement

ELEGANCE
Low Carbon Fan with EC Motor
Installation and Operating Instructions
• 3 models:
- SAP PCDB Listed
3 speed continuous running
- timer
- humidity control
• for all domestic wet rooms
• for walls, ceilings or windows
IPX4

Advertisement

Table of Contents
loading

Summary of Contents for Vectaire ELEGANCE EL1003

  • Page 1 ELEGANCE Low Carbon Fan with EC Motor Installation and Operating Instructions • 3 models: - SAP PCDB Listed 3 speed continuous running - timer - humidity control • for all domestic wet rooms • for walls, ceilings or windows IPX4...
  • Page 2 "Elegance” - HIGH PERFORMANCE, LOW CARBON FANS INSTALLATION and OPERATING INSTRUCTIONS THIS LEAFLET MUST BE AVAILABLE TO THE USER The product you have purchased is an extractor fan - do not touch it with wet or damp parts of the for exhausting directly outside or through medium body (e.g hands, feet).
  • Page 3 RANGE WARNING: Damage could be caused to the product if the installation instructions are not followed Trickle Speed 1 - 8 lt/sec - 28.8 m³/h • The product should not be used in an ambient Trickle Speed 2 - 13.6 lt/sec - 48.96 m³/h temperature higher than 40°C (104°F).
  • Page 4: Installation

    INSTALLATION...
  • Page 6 INSTALLATION check there is nothing missing in box remove front cover drill hole in wall - allow extra width if using ducting - it is the installer's responsibility to use the appropriate core cutter to obtain the correct hole diameter. use fan assembly as template to mark drill holes drill 4 x 6mm dia holes...
  • Page 7: Wiring Diagrams

    JUMPER SWITCH These fans are designed to run continuously at one of 2 lower speeds fixed at installation using the jumper switch. EL1003, EL1003DT and EL1003HDT (fig 12) Minimum Speed 1 - Jumper 1 Minimum Speed 2 - Jumper 2 To activate delay-on timer in EL1003DT and EL1003HDT plug Jumper on position 3 (fig 13) (N.B Jumpers 1 and 3 will be pre-set at the...
  • Page 8: Trimmer Adjustment

    This product has been designed and constructed using high-quality materials and components that can be recycled or re-used. Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: sales@vectaire.co.uk Web: www.vectaire.co.uk Elegance 161018 E &...

This manual is also suitable for:

Elegance el1003dtElegance el1003hdt

Table of Contents