Picture Reset - Samsung LE19C450E1W User Manual

Option
Picture Options

Picture Reset

Picture
Description
■ Size
Changes the screen shape in terms of height and width.
Also known as Aspect Ratio.
•
Auto Wide : Enables the correct picture size to
match the original video signal.
•
16:9 : Sets the picture aspect ratio to fill the screen.
• Wide Zoom : Enlarges the middle part of the
picture.
• Zoom : Magnifies the picture contents horizontally
and vertically.
• 4:3 : Sets the picture aspect ratio to 4:3 with black
or gray side bars.
• Screen Fit
: Matches every pixel of the original
image to a pixel on the TV screen (aka 1:1 pixel
mapping) to show the entire image.
● Wide Zoom : Press the ► button to select
Position, then press the ENTERE button.
Press the ▲ or ▼ button to move the picture up /
down. Then press the ENTERE button.
● Zoom : Press the ► button to Select Position, then
press the ENTERE button. Press the
▲ or ▼ button to move the picture up and down.
Then press the ENTERE button. Press the ►
button to Select Size, then press the ENTERE
button. Press the ▲ or ▼ button to magnify or
reduce the picture size in the vertical direction.
Then press the ENTERE button.
● After selecting Screen Fit in HDMI (1080i) or
Component (1080i) mode: Select Position by
pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ►
button to move the picture.
Reset: Press the ◄ or ► button to select Reset,
then press the ENTERE button. You can initialize
the setting.
Screen Fit function with HDMI 720p
● If you use the
input, 1 line will be cut at the top, bottom, left and
right as in the Overscan function.
■ Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide
TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each
individual European country requires different picture size
so this function is intended for users to select it.
• 16:9 : Sets the picture to 16:9 wide mode.
• Wide Zoom
: Magnify the size of the picture more
than 4:3.
• Zoom : Magnify the size of the picture vertically on
screen.
• 4:3 : Sets the picture to 4:3 normal mode.
■ Digital NR → Off / Low / Medium / High / Auto
Can reduce the grain effect or level of video snow seen in
images coming from poor quality sources.
•
When the signal is weak, select one of the other
options until the best picture is displayed.
■ HDMI Black Level → Normal / Low
Adjusts the black level in the picture according to the type
of signal being transmitted through HDMI.
■ Film Mode
Applies the appropriate video processing needed to
achieve the best picture quality for watching movies.
•
Off : Turn the Film Mode function off.
• Auto : Improves the picture quality for fast motion
scenes.
Resets all picture settings to the default values.
■ Reset Picture Mode : Current picture values return to
default settings.
■ Press the TOOLS button to
display the Tools menu. You can
also set the size by selecting
Tools → Picture Size.
■ Depending on the input source,
the picture size options may vary.
■ The items available may differ
depending on the selected mode.
■ In PC Mode, only 16:9 and 4:3
mode can be adjusted.
■ Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
■ Temporary image retention may
occur when viewing a static image
on the set for more than two
hours.
■ This function is available in Auto
Wide mode.
■ This function is not available in
PC, Component or HDMI mode.
■ This function is active only when
an external device is connected to
the TV via HDMI (RGB signals).
■ Film Mode is supported in TV,
AV, COMPONENT(480i / 1080i)
and HDMI(480i / 1080i).
■ Select a picture mode to be
reset. The reset is performed for
each picture mode.
25