Setting Down, Transportation And Storage; Maintenance - Miele SCRP3 Operating Instructions Manual


When vacuuming, in particular
fine dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc., electro-
static charges build up naturally. Un-
der certain conditions these charges
will be released. To avoid the un-
pleasant effects of these discharges,
a metal inlay has been incorporated
into the underside of the handle.
Please make sure that you keep your
hand in constant contact with this
metal strip during vacuuming (dia.
23).
Setting down, transportation
and storage
Park System for pauses during vacu-
uming (dia. 24)
The Park system allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead into the slot in the
parking attachment.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp,
- retract the telescopic suction tube
fully
- do not use the park system if your
vacuum cleaner has an EasyLock
suction tube.
Park system for storage (dia. 25 + 26)

Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.
If your vacuum cleaner has an Easy-
Lock suction tube you can separate
the two sections for storage purposes.
 Press the release button on the lower
section and pull the top section out.
 Push the connection piece attached
to the upper tube into the lower tube.
 Stand the vacuum cleaner upright.
If your vacuum cleaner has a tele-
scopic suction tube, retract the tubes
fully so that it takes up less room for
storage.
 Slot the floorhead downwards into
one of the parking attachments on
the side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.

Maintenance


Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
The Miele filtration system consists of
three components:
– Dustbag
– Dust compartment filter (for motor
protection)
– Exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
en
41