First Ring; Auto Clock; Register The Handset Or Additional Handsets - Philips Monolith M9951 Extended User Documentation

First ring

Your phone can cancel the first ring
before the caller ID is displayed on the
screen. You can change this setting
to suit your preference. This feature
only applies to models with first ring
support.
Turn the first ring on/off
1
Select [Menu].
2
Press / to select
[OK].
3
Select [First ring], then press [OK]
to confirm.
4
Select [On]/[Off], press [OK] to
confirm.
» The setting is saved.
Note
•
If you have set the first ring to [Off], the first
ring sound is always muted.

Auto clock

Note
•
This service is country and network
dependent.
•
Make sure you have subscribed to the caller
ID service before you use this feature.
It synchronizes the date and time
on your phone with the public
switched telephone network (PSTN)
automatically. For the date to be
, then press
synchronized, make sure the current
year is set.
1
Select [Menu].
2
Press / to select
[OK].
3
Select [Auto clock], then press
[OK] to confirm.
4
Select [On]/[Off], then press [OK]
to confirm.
» The setting is saved. .
Register the handset or
additional handsets
You can register additional handsets
to the base station. The base station
can register up to 4 handsets.
1
You can register your handset as
follows:
If the handset is in [Register
•
your Handset] status, press
[OK].
• If the handset is in [searching]
and [Unavailable] status, press
[Menu] >
press [OK] > [Register] > [OK].
2
Press and hold
station for 10 seconds.
3
Enter the system PIN. Press [Clear]
to make corrections. Then press
[OK] to confirm the PIN.
» Registration is complete in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
, then press
/ to select , then
on the base
EN
51