Auto Prefix; First Ring; Eco Mode - Philips ID9650B/12 User Manual

Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 5
digits. The maximum length of an auto prefix
number is 10 digits.
Set auto prefix
1
Press menu.
2
Select [ADVANCED SET] > [AUTO
PREFIX], then press [SELECT] to
confirm.
3
Enter the detect number, then press
[OK] to confirm.
4
Enter the prefix number, then press [OK]
to confirm.
The setting is saved.
»
Note
•
To enter a pause, press and hold
Note
•
If the prefix number is set and the detect
number is left empty, the prefix number is
added to all outgoing calls.
Note
•
The feature is unavailable if the dialed number
starts with * and #.

First ring

If you have subscribed for caller ID service with
your service provider, your phone can suppress
the first ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
2
3
•

ECO mode

The [ECO] mode reduces the transmission
power of the handset and base station.
.
1
2
3
•
Press menu.
Select [ADVANCED SET] > [FIRST
RING], then press [SELECT] to confirm.
Select [ON]/[OFF], press [OK] to
confirm.
» The setting is saved.
Note
To reset the first ring status, go to the reset
menu.
Press menu.
Select [ADVANCED SET] > [ECO], then
press [SELECT] to confirm.
Select the new setting, then press
[SELECT] to confirm.
The setting is saved.
»
» [ECO] is displayed instead of
standby mode
Note
When the [ECO] mode is activated, the
connection range between the handset and
the base station can be reduced.
in
EN
19