Subscribe to Our Youtube Channel
Related Manuals for HeartSine samaritan PAD 300P
Summary of Contents for HeartSine samaritan PAD 300P
- Page 1 HeartSine samaritan ® 300P Trainer model TRN-300 User Manual HeartSine ® HeartSine ® HeartSine PAD 300P Trainer User Manual...
- Page 2 The HeartSine PAD automated external defibrillator has a navy blue/black front membrane. The 300P Trainer is intended to be used to train responders who may use the HeartSine PAD 300P automated external defibrillator. This user manual has been written to include instructions on how to operate the HeartSine PAD 300P Trainer.
- Page 3 HeartSine samaritan PAD 300P Trainer, model TRN-300 ® Warranty Exclusion HeartSine Technologies or the authorized distributors are not obliged to carry out service/repairs under warranty if: a. Unauthorized modifications have been made to the device. b. Non-standard components are used.
- Page 4 2) Place the HeartSine PAD 300P Trainer and the trainer Pad-Pak on a flat surface. Push the trainer Pad-Pak into the opening of the HeartSine PAD 300P Trainer and listen for a “click” sound to ensure that it is properly inserted.
- Page 5 You may perform CPR or check the patient. Action arrows The action arrows around an icon will flash to indicate the actions that the user should be performing. HeartSine PAD 300P Trainer User Manual...
- Page 6 Select Scenario Attach electrodes Turning off the Trainer The remote control can be used to turn off the HeartSine PAD 300P Trainer. To turn the trainer off press the red button on the remote control. Changing the Volume There are four volume settings available on the HeartSine PAD 300P Trainer. The volume control buttons are to the left of the Off Button on the remote control.
- Page 7 Pre - programmed Training Scenarios The HeartSine PAD trainer has four preprogrammed training scenarios to choose from. All preprogrammed scenarios are based on AHA/ERC 2005 guidelines. Details of the four preprogrammed scenarios are given below. Scenario 1 Setup mode “Call for Medical assistance”, “Pull green tab”, etc User intervention “Pads”...
- Page 8 The remote control allows Training providers to control the scenario manually. When turned on the HeartSine PAD 300P Trainer will operate as detailed in the training scenarios listed. Training providers can override this by pressing the ‘Shock required’, ‘No Shock required’ or ‘Attach Electrodes’ button.
-
Page 9: Maintenance
“Warning. Low battery” If this warning is heard you may continue to use your HeartSine PAD 300P Trainer for a limited period of time. If the trainer becomes completely depleted of power it will shut itself down. At this point the Trainer should be recharged. - Page 10 Pairing a remote control with the samaritan PAD Trainer Each HeartSine PAD 300P Trainer has an specific remote control to operate it. This is to allow multiple devices to be used in close vicinity without interference. In the unlikely event that your remote control no longer operates with your Trainer it may need to be paired with your Trainer again.
- Page 11 Association (AHA) and the European Resuscitation Council (ERC) in their 2005 published Guidelines for CPR and ECC. This is intended only as a quick reference for trained CPR providers. HeartSine recommend that all potential users of the PAD 300P are trained by a competent training organisation in both the use of CPR and PAD 300P, prior to placing a PAD 300P into service.
- Page 12 HeartSine ® Worldwide Headquarters: HeartSine Technologies Inc 121 Friends Lane Suite 400 Newtown, PA 18940 Tel: 1.215.860.8100 Fax: 1.215.860.8192 Manufactured by: HeartSine Technologies Ltd Canberra House 203 Airport Road West Belfast BT3 9ED Northern Ireland Tel: +44 (0)28 9093 9400 www.heartsine.com...
Need help?
Do you have a question about the samaritan PAD 300P and is the answer not in the manual?
Questions and answers