Advertisement
STORAGE
Store the equipment and accessories out of children's reach in a
dark and dry place at above freezing temperature. The ideal storage
temperature is between 5°C and 30°C. Store the electric machine in
its original packaging.
MAINTENANCE
All the maintenance work must be conducted under the
condition of complete power failure; please make sure that power
plug is pulled out.
▪ Regularly remove the dust on the welding machine with dry
compressed air. When use it in heavy fume and polluted air, do
this job at least once a month. Compressed air should drop down
to the required pressure to prevent damaging the small parts and
units in machine.
▪ Avoid water or moist getting into welding machine, or else, blow
the welding machine to dry immediately, then measure the
insulation with insulation resistance meter, it can only be used
when the measuring result is accepted.
▪ In the event that the welding machine is not used for long-term, it
should be placed into the original package and stored in dry
place.
▪ Any improper or incorrect operation may cause the welder's
failure and damage. Routine maintenance on power control
switch, grounding device, welding electrode holder, coupling
device and set screws should be performed on a regular basis.
Repairing welding equipment should be carried out by a
NOTE:
qualified person using original spare parts. This ensures the safety
of the device as well as yourself.
IBL T220-105 | 250-106
15
Advertisement
