Advertisement
TIG ASSEMBLY
▪ While using TIG welding, Take the TIG Torch and put the Gas-
electricity plug of the welding gun to the Gas Output (4) at the
front panel, and fasten it. Put the Switch connection on the Torch
to the trigger slot (3) and fasten it as well.
▪ Place the fastening plug of the torch cable to the '-' polarity
socket and Earth clamp at the other terminal, for the work piece.
▪ Connect the Shielding gas (Argon) cylinder to the gas inlet at
the back panel of the machine.
TIG Torch
Earth clamp
Back cap
Trigger
Flow Meter
To Gas Inlet
Work piece
Collet Body
Collet
TIG Torch
IBL T220-105 | 250-106
10
Pressure Gauge
Argon
Cylinder
Nozzle
Tungsten needle
(Electrode)
Advertisement
