Advertisement
MMA ASSEMBLY
▪ Connect the welding tongs (grounding clamp and electrode
holder) correctly according to the figure. Firstly, make sure that
cable, welding tongs and quick plugs are connected reliably.
▪ Connect the electrode holder in the quick socket with the
polarity of '+', and then tighten it; suitable electrode is connected
to the holder.
▪ Connect the grounding clamp into quick socket with the polarity
-
of '
', tighten it by force; the grounding clamp connects to the
work-piece.
(*Reverse polarity is acceptable)
WARNING!
connections are tight. If a connection is slack, it will result in
voltage drop that will cause the connection to heat.
INSTALLATION
Earth clamp
Electrode holder
Make sure that welding cable and earth cable
IBL T220-105 | 250-106
9
Work piece
Advertisement
