Table of Contents
Advertisement
Stitch length adjustment
lever (7)
When you select a stitch, the
machine will automatically set
the recommended stitch length.
The stitch length can be
regulated by sliding the stitch
length adjustment lever.
Auto settings are easily
determined by sliding the lever.
The LED indicator next to the
lever will blink and beep 1 time
to indicate the setting is at the
auto position.
When the setting is at the auto
position, you can manually
change the length according to
your preference. Starting at the
auto position, slide the lever to
the left or right to locate each
potential adjustment. At each
manual adjustment point, the
LED will blink 3 times and beep
once.
To shorten the stitch length,
slide the lever to left. For a
longer stitch length, slide the
lever to right. The stitch length
can be adjusted between "0.0-
4.5". Certain stitches have
limited lengths.
Pattern selection buttons (8)
Turn on the power switch and
the LED indicator above the
straight stitch pattern will be lit.
To select other patterns, press
the pattern selection button to
the right of the row that
contains your desired pattern.
Stop when the LED indicator
above your pattern is lit.
27
Advertisement
Table of Contents
