Operating The Camera - BenQ LS200 Series User Manual

20 Operating the camera

Operating the camera
The procedure below is a general guideline for basic operation. It is particularly
useful if you are new to the camera.
1. Press the Power button to turn the power on.
2. Slide the mode switch to
to locate desired options (under two different tabs:
press or
Remember to follow the on-screen display or slide to
(wherever available). Next, press corresponding buttons to access and set more
options. At any time, you can cancel the current operation by pressing
return to your previous step.
3. Slide to to zoom-in or
4. Press the shutter halfway to set automatic focus. Once the focus is set, the
focus frame color will turn from white (unfocused) to yellow-green (focused).
If the focus frame color is red and you press the shutter down, it might result
in a blurred photo.
5. Press the shutter down fully to capture.
6. Release the shutter.
7. Slide the mode switch to
adjust the optical zoom as needed and press the shutter down to start video
recording (press the shutter again to stop video recording).
8. Slide the mode switch to
You can press
or to zoom-in/out a captured image, or slide to
the screen.
and press
to make selections.
to zoom-out.
and enter the
and view captured images or recorded videos.
, or to move to different images/videos, slide to press
Optical Zoom
> ,
and
for instructions
Movie Record
to view 9 images on
Digital Zoom
, , or
), and then
to
mode. Next,