Using Full Feature Nat - ZyXEL Communications P-660H-TX Support Notes

5. Using Full Feature NAT

When P-660H-Tx v2 is in Routing mode, you can select NAT Option as
Full Feature in Network -> General ->NAT Setup
Key Settings:
Field
Network Address
Translation
Configuring NAT
Address Mapping Sets and NAT Server Sets
All contents copyright © 2006 ZyXEL Communications Corporation.
Options Description
When you select this option you can select
Full Feature
Address Mapping Set Number 1~8 in the
pull-down menu on the right.
When you select this option, this remote node will
use default SUA Address Mapping Set. You can
see it in CLI by command 'ip nat lookup 255'. It's
SUA Only
a read-only set with two rules: Many-to-One and
server mapping. Select Full Feature when you
require other mapping types.
P-660H-Tx v2 Support Notes
41