Toshiba REGZA YL76 Series Manual page 81

Q
Why doesn't the wireless network work?
A
Make sure the TOSHIBA Dual Band WLAN Adaptor is
used (see page 14).
Check that the AP is powered on.
Q
Why doesn't the Media Player feature operate?
A
Make sure that devices are connected correctly.
Incorrect behavior may occur with a USB hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
LED-3 LED-2 LED-1
Orange Green Green
(Solid) (Solid) (Solid)
Programme Timer is
Red Green Green
(Solid) (Solid) (Solid)
Programme Timer is
OFF Green Green
(Solid) (Solid)
Programme Timer is
Orange OFF Green
(Solid) (Solid) On Timer is NOT set
Programme Timer is
Red OFF Green
(Solid) (Solid) On Timer is NOT set
Programme Timer is
OFF OFF Green
(Solid) On Timer is NOT set
Programme Timer is
Orange Green Red Power OFF (Standby)
(Solid) (Solid) (Solid)
Programme Timer is
Condition Solution
Power ON
On Timer is set
–
set
Power ON
On Timer is set
–
active
Power ON
On Timer is set
–
NOT set
Power ON
–
set
Power ON
–
active
Power ON
–
NOT set
On Timer is set
–
set
Q
Why doesn't the 3D feature operate correctly?
A
If 3D images are not correct, the 3D format may be
different, change the 3D format from Quick menu.
If 2D images are not correct, the 2D format may be
different, change the 2D format from Quick menu.
The left and right sides of 3D images may be reversed.
Switch the left and right.
Remove all obstructions between the 3D glasses and
the TV.
Replace the 3D Glasses' battery.
LED indication
LED-3 LED-2 LED-1
Red Green Red
(Solid) (Solid) (Solid)
OFF Green Red
(Solid) (Solid)
Orange OFF Red
(Solid) (Solid)
Red OFF Red
(Solid) (Solid)
OFF OFF Red
(Solid)
OFF OFF Green
(Blinks)
OFF OFF Red
(Blinks)
OFF Green OFF
(Blinks)
81
PROBLEM SOLVING
LED-1
LED-2
LED-3
Condition Solution
Power ON (Standby)
On Timer is set
–
Programme Timer is
active
Power OFF (Standby)
On Timer is set
–
Programme Timer is
NOT set
Power OFF (Standby)
On Timer is NOT set
–
Programme Timer is
set
Power ON (Standby)
On Timer is NOT set
–
Programme Timer is
active
Power OFF (Standby)
On Timer is NOT set
–
Programme Timer is
NOT set
Abnormal operation
Turn OFF the TV
of BUS line.
and unplug the
Abnormal operation power cord. Plug
of WDT. the power cord in
again and turn
Fan stopped.
ON the TV.
(if applicable)