Table of Contents
Advertisement
Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
Power button ( )
LCD monitor
R
Select [YES] within
10 seconds
Slide your finger up and down on the
sensor. Then touch OK. (
•
When the message disappears, press
the power button for at least 2 seconds
to turn off the power, and then press it
again for at least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch
them with your finger nail or with gloves
on.
Z
p. 9)
S
Select [CLOCK SETTING]
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
T
Select the city closest to
the area where you use
the camcorder
AREA SETTING
GMT
SET
U
Select [ON] or [OFF]
Select [ON] if daylight saving time is
effective.
SET FOR DAYLIGHT SAVING TIME
SET
V
Set the date and time
Touch sensor: Sets the date and time
: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING
DATE
SAVE
CLOCK ADJUST
@
QUIT
:
1.1.2009 01:00
QUIT
DAYLIGHT SAVING TIME (DST)
OFF
1. 1.2009 01:00
SET DAYLIGHT SAVING TIME
QUIT
TIME
11
2009
16
55
1
GMT
0:00
QUIT
Advertisement
Table of Contents
