RedMax G455AVS Owner's/Operator's Manual page 18

B. Guide Bar
• Reverse the bar occasionally to prevent partial
wear.
• The bar rail should always be a square. Check
for wear of the bar rail. Apply a ruler to the bar
and the outside of a cutter. If a gap is observed
between them, the rail is normal. Otherwise, the
bar rail is worn. Such a bar needs to be
corrected or replaced.
This saw is equipped with the following low kickback bar/chain combination:
Saw Model
G455AVS
For replacement use only above bars and chains or the following:
OREGON BAR
16 inch DOUBLE GUARD™ Pro bar,
Mount code #A195.
16
WARNING:
RedMax® Part Number
Bar Size Guide Bar
16" G0021
Saw Chain
33SL-66X
OREGON CHAIN
G455AVS
33SL