Table of Contents
Advertisement
ALG is enabled. For this reason, the router provides the option to disable the SIP
ALG.
6. Click the Apply button.
Your settings are saved.
Manage the WAN preference
By default, your router's WAN preference is set to use the 10G Internet port, and you
can connect a modem to the 10G Internet port.
Note: If both your Internet service provider (ISP) and modem support a speed of
10 Gbps, the router's Internet connection also functions at 10 Gbps. Otherwise, the
Internet connection functions at the maximum speed that either your ISP or your modem
supports. (1 Gbps is a common speed.)
You can also change the WAN preference to WAN aggregation. An aggregated WAN
connection is connected to your Internet Service Provider (ISP). The benefits of WAN
aggregation include seamless multi-gig connectivity and the full speed of your ISP
connection for the connected device.
Set up WAN aggregation
An aggregated WAN (Internet) link is connected to your Internet Service Provider (ISP).
The benefits of WAN aggregation include seamless multi-gig connectivity and the full
speed of your ISP connection for the connected device.
To set up WAN aggregation, you need a modem that supports Link Aggregation Control
Protocol (LACP).
To set up WAN aggregation with the Orbi router:
1. Set up WAN aggregation on your modem.
For information about how to set up WAN aggregation on your modem, see the
documentation that came with your modem.
2. Log in to your router and enable WAN port aggregation:
a. Launch a web browser from a computer or mobile device that is connected to
the Orbi network.
b. Enter orbilogin.com.
A login window opens.
c. Enter the router admin user name and password.
Specify Network Settings
Orbi Quad-Band Mesh WiFi 6E System
70
User Manual
Advertisement
Table of Contents
