Orbi Router Led Behavior - NETGEAR RBRE960B User Manual

7. Power LED: For more information about the Power LED behavior, see Orbi router
LED behavior on page 11.
8. Reset button: Use the Reset button to restart (reboot) the router or reset the router
to its factory default settings:
• Restart the router: Press the Reset button for less than five seconds. The Power
LED lights solid amber and the router restarts.
• Reset the router to its factory default settings: Press and hold the Reset button
until the Power LED starts blinking amber. The router resets and returns to its
factory settings. For information about the factory settings, see Factory settings
on page 146.

Orbi router LED behavior

The Orbi router has an LED on the front and a Power LED on the back.
The following table describes the LED behavior for the router's Power LED.
Table 1. Power LED behavior
LED color
Solid green
Solid amber
Blinking amber
Blinking red
Off
The following table describes the LED behavior for the router LED located on the front
of the router.
Table 2. Router LED behavior
LED color
Pulsing white
Solid white
Overview
Orbi Quad-Band Mesh WiFi 6E System
Description
Power is on.
The router is restarting.
The router's firmware is resetting to its factory
default settings.
The router's firmware is corrupted.
Power is not supplied to the router
Description
The router is powering up or the Sync button
was pressed.
The router is resetting to its factory default
settings.
11 User Manual