NETGEAR Orbi Wi-Fi 6 Quick Start Manual

Welcome to your new
Orbi Wi-Fi 6 router
What's in the box?
1x NETGEAR Orbi Wi-Fi 6 router
1
Download the
Orbi app
2
Connect your
Orbi router
1. Connect the Ethernet cable to your Orbi's Internet port, then connect
the other end to the port labelled LAN1 or GE1 on your Optical Network
Terminal – that's the fibre box usually found on your wall.
2. Connect the power adapter and turn your Orbi on at the wall.
Got extra Orbi satellites? Find a place to plug them in now, or you can set
them up later. Orbi satellites must be within range of your Orbi router's Wi-Fi
signal, so don't place them too far apart from each other.
If you have a landline, connect it to the port labelled POTS or TEL on your
Optical Network Terminal.
1x Power adapter 1x Ethernet cable
ONT
LAN TEL