Manage The Wan Preference For Orbi Router Model Rbr860; Set Up Internet Port Aggregation For Orbi Router Model Rbr860 - NETGEAR Orbi RBR860 User Manual

applications, or multimedia applications from working. Open NAT provides a
much less secured firewall, but allows almost all Internet applications to work.
• Disable SIP ALG. The application-level gateway (ALG) for the Session Initiation
Protocol (SIP) is enabled by default for enhanced address and port translation.
However, some types of VoIP and video traffic might not work well when the SIP
ALG is enabled. For this reason, the router provides the option to disable the SIP
ALG.
6. Click the Apply button.
Your settings are saved.
Manage the WAN preference for Orbi router
model RBR860
By default, your router's WAN preference is set to use the 10G Internet port, and you
can connect a modem to the 10G Internet port.
Note: If both your Internet service provider (ISP) and modem support a speed of
10 Gbps, the router's Internet connection also functions at 10 Gbps. Otherwise, the
Internet connection functions at the maximum speed that either your ISP or your modem
supports. (1 Gbps is a common speed.)
You can also change the WAN preference to WAN aggregation. An aggregated WAN
connection is connected to your Internet Service Provider (ISP). The benefits of WAN
aggregation include seamless multi-gig connectivity and the full speed of your ISP
connection for the connected device.
Set up Internet port aggregation for Orbi router model
RBR860
An aggregated WAN (Internet) link is connected to your Internet Service Provider (ISP).
The benefits of WAN aggregation include seamless multi-gig connectivity and the full
speed of your ISP connection for the connected device.
To set up WAN aggregation, you need a modem that supports Link Aggregation Control
Protocol (LACP).
Specify Network Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
68 User Manual