Gigabyte X299-WU8 User Manual page 87

Step 3:
After the system reboots, enter BIOS Setup again.
Then enter the Peripherals\Intel(R) Virtual RAID
on CPU sub-menu. Press <Enter> on All Intel VMD
Controller.
Step 5:
Enter a volume name with 1~16 letters (letters
cannot be special characters) under the Name item
and press <Enter>. Then, select a RAID level. (The
selections available depend on the number of the
hard drives and type of the Intel
Key being installed)
Step 7:
Then set the stripe block size. The stripe block
size can be set from 4 KB to 128 KB. Once you
have selected the stripe block size, set the volume
capacity. After setting the capacity, move to Create
Volume and press <Enter> to begin.
Step 4:
Press <Enter> on Create RAID Volume to enter the
Create RAID Volume screen.
Step 6:
Under the Select Disks item, select the hard drives
to be included in the RAID array. Press the <Space>
key on the hard drives to be selected (selected hard
drives are marked with "X").
VROC Upgrade
®
Step 8:
After completing, you'll be brought back to the
Intel(R) Virtual RAID on CPU screen. Under Intel
VROC Managed Volumes you can see the new
RAID volume.
- 87 - Configuring a RAID Set